Sizing Guide

Our buckles are designed with about 6 inches of total waist adjustment. This adjustment is typically centered on each size range. For example: if you select the 32-34 in. size range and you have a 32 in. waist, you will have about 2 inches left of adjustment to go tighter if needed and about 4 inches of adjustment to loosen the belt if needed. 

We typically recommend that if you are between sizes that you go smaller but we offer a 100% satisfaction guarantee and if your belt doesn't fit right, we will replace it at no cost to you with the right size. 

In addition, our latest belts offer 6 inches of resize-ability. Just remove three screws, put the buckle where you need it, and re-attach. That's all it takes! So you don't have to fret if the sizing is a little off.

Most pant loops are designed around a 1.5 inch belt width, and our most popular belts the Victory 1.5 and the Triumph 1.5 both will properly fill the belt loops on most pants. 

For pants with smaller belt loops, check out our 1 inch belt offerings. For outside-the-pant-loop duty belt applications, our inner belts are 1.5" to fit through belt loops and our outer belts come in both 1.5 inches and 2 inches. The 1.5 inch duty belt can still be used in the belt loops without the inner belt if desired.

If any additional info is needed, send us a message via the contact us page and we'll get you the info you require.